(Note: The origin of this information may be internal or external to Novell. Novell makes every effort within its means to verify this information. However, the information provided in this document is FOR YOUR INFORMATION only. Novell makes no explicit or implied claims to the validity of this information.)
TITLE: Removing a Server
DOCUMENT ID#: FYI.P.6051
DATE: 04Dec92
PRODUCT: NetWare Lite
PRODUCT VERSION: All versions
SUPERSEDES: FYI.P.6035
SYMPTOM: NA
ISSUE/PROBLEM
Removing a Server
If you set up your machine as a server and want to remove the server software from your hard drive, complete the following:
1. Boot your machine without loading SERVER.
2. Run the original INSTALL.EXE that came on the installation diskettes.
3. Select "Make this machine a client." When asked to select the network interface card, press ESC and exit the INSTALL utility. The server is now removed from your hard disk drive.
Another option is to simply remove SERVER.EXE from your STARTNET.BAT file. This way, SERVER.EXE will not be loaded, and hence, the machine will be a client only.